SH QD Style Bushing - To be used with QD Sprockets or Pulleys; Quantity Discounts Taper Lock 5/16-18" X 3/4"- 1-1/4" =

5/16-18" X 3/4"- 1-1/4" = FULL THREAD

50B30H Type B Sprocket

1-1/2" x 2-1/2" x 4-1/2" with

60x41 Weld Sprockets

QD Style Bushed Sprocket

SH QD Style Bushing - To be used with QD Sprockets or Pulleys; Quantity Discounts Taper Lock 5/16-18" X 3/4"- 1-1/4" =QD BUSHINGS TYPE SH Choose your bore size above. To be used with QD Sprockets or Pulleys QD Bushings are precision machined tapered and fully split on one side. The taper bored QD Sprocket or Pulley easily fits over the tapered bushing, and tightening of the cap screws produces a tight press fit on the shaft. The sprocket is easily removed from the bushing by using the pull up bolts as jackscrews in the holes tapped in the rim of the sprocket.